Sunseeker Elite X7 Gen 2 – Wireless AWD Robotic Lawnmower for up to 3,000 m²

Sunseeker Elite X7 Gen 2 – wireless AWD robotic lawn mower for up to 3000 m². The Sunseeker Elite X7 Gen 2 is a high-end, fully autonomous robotic lawn mower designed for large and complex lawns of up to 3000 m². The robot does not require a perimeter wire, and the nRTK version does not require a local RTK reference antenna installed on your property.
The new generation AONavi™ 2.0 navigation system combines networked RTK positioning, VSLAM 2.0 visual navigation, binocular cameras, an iToF depth sensor, and an integrated 4G and GPS module. Thanks to these technologies, the robot accurately navigates in open areas, near buildings, between trees, and in other more complex parts of the property.
A powerful all-wheel-drive system, independent suspension, and an actively steered rear wheel allow the robot to tackle slopes of up to 70% or 35°. The wide 35 cm dual cutting disc system maintains large lawn areas quickly and evenly, while the electric 20–100 mm cutting height adjustment allows you to choose the most suitable height for your lawn.
Key benefitsDesigned for lawns up to 3000 m²
No perimeter wire installation required
nRTK version does not require a local RTK antenna
AONavi™ 2.0 navigation
Network RTK and VSLAM 2.0 positioning
Centimeter-accurate virtual boundaries
Vision AI 2.0 obstacle recognition
Binocular cameras and iToF depth sensor
Reliable obstacle detection day and night
10 TOPS AI processor
Three-wheel AWD system
Tackles slopes up to 70% or 35°
Independent front suspension
Actively steered rear wheel
Large 22 cm off-road type front wheels
Two floating cutting discs
Wide 35 cm cutting width
Electric cutting height adjustment
Cutting height from 20 to 100 mm
Systematic mowing in parallel lines
Multiple mowing direction options
Automatic lawn division into work zones
Management of multiple separate lawn zones
Virtual no-go zones
Automatic rain detection
GPS tracking and theft protection
Wi-Fi, Bluetooth, 4G, and GPS connectivity
Mobile app control
Amazon Alexa and Google Assistant support
OTA software updates
IPX5 water resistance
Quiet operation – approximately 60 dB
Fully wireless installationThe Sunseeker X7 Gen 2 sets lawn boundaries digitally, so there is no need to lay a perimeter wire around the property. The lawn map, mowing zones, passageways, and no-go zones are created using the "Sunseeker Smart" mobile app.
If the layout of the property changes, virtual boundaries can be adjusted in the app. There is no need to dig up and move buried wires, making it easy to change the location of flower beds, a trampoline, outdoor furniture, a terrace, or other objects.
The nRTK model version uses a networked RTK signal, so it works without a local RTK reference station installed on your property. The manufacturer specifies centimeter-level positioning accuracy without a traditional RTK base antenna.
AONavi™ 2.0 navigation systemAONavi™ 2.0 combines two complementary navigation technologies:
Network RTK ensures precise satellite positioning of the robot in open areas of the lawn.
VSLAM 2.0 uses camera footage, the robot's movement, and environmental objects to maintain stable navigation where the satellite signal may be blocked by trees, tall buildings, or other obstacles.
The redesigned binocular camera and iToF sensor system allow the robot to better understand environmental depth, distances, and terrain features. As a result, the robot can continue working even in more densely planted areas or parts of the property that partially block the satellite signal.
Vision AI 2.0 obstacle recognitionThe updated Vision AI 2.0 system helps the robot detect and safely navigate around obstacles in the lawn.
During the day, the environment is monitored by binocular cameras, which allow for the determination of object shape, size, and distance. In the dark and in low-light conditions, the iToF sensor is used, allowing the robot to accurately perceive its surroundings in the evening or at night.
The system is designed to detect not only items on the ground but also partially suspended obstacles, such as trampoline structures or swing parts. The robot also features drop protection and a physical bumper for additional safety.
Three-wheel AWD systemThe Sunseeker X7 Gen 2 features an advanced three-wheel all-wheel-drive system. Each wheel is driven and controlled independently, giving the robot better surface grip and more stable movement in challenging conditions.
The AWD system provides better traversability:
on steep slopes;
on damp grass;
on uneven terrain;
in depressions and on hills;
in areas with poorer wheel traction;
when transitioning between different lawn surfaces.
The actively steered rear wheel allows the robot to make smoother turns, spin less in place, and reduce the risk of damaging the lawn surface.
Independent suspensionThe robot's front wheels have an independent suspension system. It allows each wheel to better adapt to different surface heights and helps maintain a more stable robot position when driving over bumps.
The suspension absorbs some of the impact and improves the robot's ability to traverse:
lawn depressions;
small mounds;
unevenness formed by tree roots;
transitions between different surfaces;
small height differences at lawn edges.
Large, approximately 22 cm diameter off-road type front wheels provide additional grip and traversability.
35 cm dual-disc cutting systemThe Sunseeker X7 Gen 2 is equipped with a wide 35 cm dual cutting disc system. A larger cutting width allows for faster processing of large lawns and reduces the robot's overall working time.
The manufacturer indicates that the cutting blades located on both discs allow for even and fine grass cutting. With regular mowing, the cut grass particles remain on the lawn, decompose quickly, and can act as a natural fertilizer.
Two discs help to:
mow large areas faster;
reduce the number of passes required;
maintain a more even cutting result;
maintain denser lawns more effectively;
form wider and more uniform mowing strips.
Electric cutting height adjustmentThe cutting height is adjusted electrically in the mobile app. The available height range is from 20 to 100 mm.
The wide adjustment range allows the robot to be adapted to different lawn types and seasonal conditions:
lower cutting for decorative lawns;
medium height for everyday home lawns;
higher height during hot and dry periods;
higher initial setting for overgrown lawns;
gradual height reduction over several mowing cycles.
Using the target height function, overgrown or dense lawns can be mowed in several stages. The robot gradually reduces the cutting height until the value set in the app is reached.
Mowing at different anglesIn the app, you can choose the desired mowing direction or use several different directions.
By periodically changing the mowing angle, the robot does not constantly travel along the same lines. This helps reduce the formation of wheel tracks, improve the appearance of the lawn, and ensure that the grass is reached from different sides.
The user can create neat parallel strips or choose a few angles for different mowing cycles.
Multiple lawn zone managementThe app allows you to create several separate mowing zones and connect them with virtual passageways.
Individual settings can be selected for each zone:
mowing schedule;
cutting height;
mowing direction;
mowing angle;
work priority;
mowing frequency;
edge mowing mode.
This is convenient for properties where the front, back, and side lawns have different maintenance needs.
Virtual no-go zonesIn the app, you can mark areas that the robot should not enter.
Since the zones are virtual, they can be quickly moved, changed, or deleted without performing any physical work.
Multiple mowing modesThe Sunseeker X7 Gen 2 offers several working modes designed for different situations.
Standard systematic mowing is used to maintain the entire planned lawn area.
Edge mowing allows the robot to follow the set virtual lawn boundary and mow the edge strip.
Mowing onto the edge can be used where the lawn and adjacent hard surface are at the same level.
Targeted mowing allows you to select a specific spot in the app that remained unmowed due to a previously present obstacle. The robot does not need to mow the entire lawn again.
GPS tracking and theft protectionThe integrated 4G and GPS module provides additional protection for the robot.
Security features include:
real-time tracking of the robot's location;
adjustable geo-fencing;
alerts when the robot leaves the defined territory;
notifications in the mobile app;
location tracking after the robot's main power is switched off.
The manufacturer's website indicates that a 24 or 60-month NetRTK and 4G service subscription may be provided with the robot, depending on the specific market and offer. Once the included period ends, a reference extension price of 49 EUR per year is currently indicated. Before publishing in the store, it is recommended to enter the period applicable to the specific kit you are selling.
Automatic rain detectionThe integrated rain sensor allows the robot to detect when rain has started.
Depending on the settings chosen in the app, the robot can:
stop mowing;
return to the charging station;
wait for a set time;
automatically resume work when weather conditions improve.
This helps reduce the risk of wheel slippage and lawn damage when the soil is very wet.
IPX5 water resistanceThe Sunseeker X7 Gen 2 has an IPX5 water resistance rating. The robot is adapted for outdoor work and can be cleaned with water, following the maintenance instructions provided by the manufacturer.
For regular robot maintenance, it is recommended to:
remove grass accumulated under the cutting discs;
check the condition of the blades;
remove grass accumulated around the wheels;
clean the cameras and sensors;
periodically replace worn blades.
Quiet operationThe noise generated by the robot is approximately 60 dB, so it can maintain the lawn without disturbing the normal home environment.
Quiet electric operation allows for more flexible scheduling of mowing times in the morning, during the day, or in the evening, though it is always recommended to follow local noise regulations.
Smart home integrationThe Sunseeker X7 Gen 2 supports integration with:
Amazon Alexa;
Google Assistant.
In a compatible smart home system, some basic robot functions can be controlled by voice commands. The list of available commands may depend on the region, app version, and the selected voice assistant system.
OTA software updatesThe robot's software can be updated remotely.
OTA updates can provide:
navigation improvements;
changes to obstacle recognition;
additions to app features;
system stability fixes;
new operating modes;
security updates.
The robot does not need to go to a service center if the update can be installed via the app and an internet connection.
Technical specificationsCharacteristic
Value
Model
Sunseeker Elite X7 Gen 2
Recommended lawn area
Up to 3000 m²
Navigation system
AONavi™ 2.0
Positioning
Network RTK and VSLAM 2.0
Local RTK antenna
Not required for nRTK version
Perimeter wire
Not required
Camera system
Binocular cameras and iToF
Obstacle recognition
Vision AI 2.0
AI processor
10 TOPS
Drive system
Three-wheel AWD
Maximum recommended slope
Up to 70% / 35°
Front wheels
Approx. 22 cm, off-road type
Suspension
Independent
Rear wheel
Driven and actively steered
Cutting system
Two floating cutting discs
Cutting width
35 cm
Cutting height
20–100 mm
Cutting height adjustment
Electric, in app
Mowing method
Systematic mowing in parallel lines
Multi-zone management
Yes
Virtual no-go zones
Yes
Targeted mowing
Yes
Edge mowing
Yes
Rain sensor
Yes
Connectivity
Wi-Fi, Bluetooth, 4G, and GPS
Theft protection
GPS tracking and geo-fencing
Water resistance
IPX5
Noise level
Approx. 60 dB
Software updates
OTA
Smart home integration
Alexa and Google Assistant
Control
Sunseeker Smart app
Display
Integrated smart LCD screen
Battery
Lithium-ion, approx. 10 Ah*
Average operating time
Approx. 2 hrs 15 min.*
Charging time
Approx. 1 hr 25 min.*
Charger
Approx. 5 A*
* Battery, operating time, and charger data are based on X7 Gen 2 specifications announced by European retailers. Before publishing, it is recommended to check the technical sheet of the kit supplied to your specific market.
Who is the Sunseeker X7 Gen 2 for?This model is worth choosing when:
the lawn area is up to 3000 m²;
you do not want to lay a perimeter wire;
you do not want to install an RTK antenna on your property;
there are trees or tall buildings on the property;
the lawn is divided into several zones;
the property has steep slopes;
the lawn is uneven or complex in shape;
wide and fast mowing is required;
you want electric cutting height adjustment;
work during the day and at night is important;
GPS anti-theft protection is required;
you want to control the robot remotely;
you are looking for a high-end robot for a large and complex property.
Why choose the Sunseeker Elite X7 Gen 2?The Sunseeker Elite X7 Gen 2 stands out for its high traversability, wide dual-disc cutting system, and hybrid satellite and visual navigation.
AONavi™ 2.0 allows the robot to navigate accurately without a perimeter wire and local RTK antenna. The Vision AI 2.0 system helps detect obstacles day and night, while the 10 TOPS processor quickly processes information from cameras and sensors.
The three-wheel AWD system, active rear-wheel steering, and independent suspension allow the X7 Gen 2 to work reliably where simpler robotic mowers might lose grip or get stuck.
A wide 35 cm cutting mechanism, 20–100 mm electric height adjustment, and systematic route planning help maintain a large lawn quickly and evenly.
Sunseeker Elite X7 Gen 2 – professional-grade wireless lawn care for large, hilly, and complex properties.